Our testing and calibration laboratories are accredited by DAkkS according to DIN EN ISO/IEC 17025. This accreditation ensures the high competence of our laboratories and is internationally recognized. Thanks to DAkkS’s membership in the multilateral agreements of EA, IAF, and ILAC, our accreditations are valid worldwide. The accreditation applies to the procedures listed in the respective certificate. Further information can be found in our certificates and their annexes. For details on the flexible scope of accreditation, see Flexible Accreditation.

• Accredited testing laboratory for sound and vibration, electromagnetic fields and light, for air pollution control and measurement of hazardous substances 
  Registration number D-PL-14119-01-00  (Certificate, Annex to Certificate)
  Including the following sub-certificates
   
• Sound and vibration, air pollution control and measurement of hazardous substances
  Registration number D-PL-14119-01-01 (Certificate, Annex to Certificate)
  within the testing laboratory for the measurement of hazardous substances:
  Selected physical, physico-chemical and chemical analyses of consumer goods
  Registration number D-PL-14119-01-03 (Certificate, Annex to Certificate)
   
• Electromagnetic fields and light 
  Registration number D-PL-14119-01-02 (EMF) (Certificate, Annex to Certificate)
  Registration number D-PL-14119-01-04 (Light) (Certificate, Annex to Certificate)
   
• Accredited calibration laboratory 
  Calibration laboratory for acceleration and acoustical quantities
  Registration number D-K-14119-01-00 (Certificate, Annex to Certificate)

Müller-BBM Industry Solutions GmbH has been officially recognized as an expert body in accordance with § 29b of the Federal Immission Control Act (BImSchG) in conjunction with the Notification Ordinance (41st BImSchV).
The recognition covers:

• The determination of emissions and immissions of air pollutants, noise, and vibrations
• The verification of proper installation and functionality
• The calibration of continuously operating emission measurement systems
• The inspection of combustion conditions

Detailed information on the substances and activities according to the group classification of the 41st BImSchV is published in the Measurement and Expert Bodies Research System.

Switzerland:
Müller-BBM Industry Solutions GmbH (as legal successor to Müller-BBM GmbH) is a qualified measurement company, a member of the Luftunion, and has been audited by the KVU (Conference of Heads of Environmental Protection Agencies) for corresponding measurements in Switzerland. Detailed information on our areas of activity (approval type Z, measurement categories 1 to 8) in Switzerland is available on the KVU website: Zugelassene Messstellen | KVU

France:
As an accredited measurement body, Müller-BBM Industry Solutions GmbH (as legal successor to Müller-BBM GmbH) is authorized in France for all approval numbers (numéros d'agréments délivrés conformément à l'annexe I de l'arrêté du 11 mars 2010) and is listed in the Légifrance of the French Republic: https://www.legifrance.gouv.fr

Luxembourg:
Müller-BBM Industry Solutions GmbH (as legal successor to Müller-BBM GmbH) is recognized as a “personne agréée” by the Ministry of Environment, Climate and Biodiversity of Luxembourg for the listed measurements (numbers A11, A12, A13, A2, A3, A5, C1, C2, C3, C4, C5, C6, C7, C8, E1, E5, E6): https://environnement.public.lu/fr/organismes-agrees.html

Müller-BBM Industry Solutions GmbH has operated a quality management system since 1997. The regulations that are binding for all employees are defined in a quality management manual and are continuously monitored and further developed by the management as part of an ongoing improvement process.

The management system of Müller-BBM Industry Solutions GmbH complies with the requirements of DIN EN ISO 45001
(Occupational health and safety management systems – Requirements with guidance for use).
Additionally, the VBG (German Institution for Statutory Accident Insurance and Prevention) has confirmed that the requirements of NLF/ILO-OSH 2001 are met.

• Standard: DIN EN ISO 45001
• Registration number: BG 108/2024/0029
• Certificate valid until: May 31, 2027

The safety and health of employees are essential prerequisites for achieving the company’s objectives.
Occupational safety is regarded as a leadership responsibility. Management, supervisors, and employees work together and take personal responsibility for creating working conditions that enable safe, healthy, and successful work. This includes safe and ergonomic equipment, workplaces, and workflows. Operational processes are continuously evaluated and optimized to reduce the risk of disruptions, hazardous situations, and workplace accidents. Goals are defined to promote the continuous improvement of the occupational health and safety (OHS) management system.

VMPA approved noise control testing facilities according to §29b BImSchG

The headquarter in Planegg and the branch office in Gelsenkirchen of Müller-BBM Industry Solutions GmbH are listed in the directory of VMPA e.V. as VMPA measurement centers approved under §29b BImSchG (Group V).

VMPA Measurement Center §29b BImSchG (Group V)_Gelsenkirchen
VMPA Measurement Center §29b BImSchG (Group V)_Planegg

VMPA approved vibration control testing facility

The branch offices in Berlin, Dresden, Gelsenkirchen, Hamburg, and Stuttgart, as well as the headquarters in Planegg, of Müller-BBM Industry Solutions GmbH are listed in the directory of VMPA e.V. as VMPA measurement centers with activity area Group VI – determination of vibrations according to Annex 1 of the 41st BImSchV.

VMPA Measurement Center §29b BImSchG (Group VI)_Planegg
VMPA Measurement Center §29b BImSchG (Group VI)_Berlin
VMPA Measurement Center §29b BImSchG (Group VI)_Dresden
VMPA Measurement Center §29b BImSchG (Group VI)_Gelsenkirchen
VMPA Measurement Center §29b BImSchG (Group VI)_Hamburg
VMPA Measurement Center §29b BImSchG (Group VI)_Stuttgart

Müller-BBM Industry Solutions GmbH employs a wide range of staff with personal certifications of expertise. These include publicly appointed and sworn experts, state-recognized experts, as well as other officially appointed and notified experts. Due to the close alignment of these certifications with specific technical fields, detailed information can be found on the respective webpages of each area of expertise.

Flexibility

[Flex A] for the testing areas and the calibration laboratory

The calibration laboratory for acceleration and acoustic measurement quantities, as well as our testing laboratory, have been confirmed by DAkkS (German Accreditation Body) to apply “standardized or equivalent testing procedures and calibration guidelines with different editions” for the procedures listed in the respective certificate annexes.

Which procedures are flexible under category [Flex A]?
Almost all testing procedures of the accredited testing laboratories and selected procedures of the calibration laboratory.
This means the laboratories are authorized to independently verify revised standards (new editions) without requiring changes to the certificate annex (see Accreditations).

For transparency, the procedures currently in use in the laboratories are available here (“Current Procedures”):

Accredited Testing Laboratories

• Sound and Vibrations
  Registration number: D-PL-14119-01-01 (Current Procedures)
   
• Electromagnetic Fields and Light
  Registration numbers: D-PL-14119-01-02 and D-PL-14119-01-04 (Current Procedures)
   
• Environmental Impact Control (Immissionsschutz)
  Registration number: D-PL-14119-01-01 (Current Procedures)
   
• Hazardous Substance Measurements
  Registration numbers: D-PL-14119-01-01 and D-PL-14119-01-03 (Current Procedures)

Accredited Calibration Laboratory

• Calibration laboratory for acceleration and acoustic measurement quantities
  Registration number: D-K-14119-01-00 (Current Procedures)

Flexibility Category [Flex B]

For a small number of procedures in the testing area of sound and vibrations (D‑PL-14119-01-01), flexibility under category [Flex B] has been confirmed by DAkkS.

Under this category, the testing laboratory is permitted to “freely select standardized or equivalent testing procedures within a defined testing scope.”

Flexibility under category [Flex B] specifically refers to the ability to adapt to different machine types and machine-specific measurement requirements.
Examples of machine-specific standards are listed both in the certificate annex and in the “Current Procedures” list.